Best Tips for Water Damage Lakeway
Water Damage Restoration is a very difficult task, especially if you are doing everything all by yourself. To avoid the problems and mistakes that could turn up to be a disaster, one should hire a Water Damage Lakeway Company. If you go in for a company with experienced team of personnel it will be good for you in long run. They have the experience of restoring things from water damage very easily and try to Avoid the Big Losses.
The sooner your call, the lesser your losses will be. Water damage restoration companies especially in Water Damage Lakeway and the surrounding areas will also guarantee you that their repair estimates will be accepted by the insurance company which means that you have almost nothing to lose by hiring professionals.
Interesting Facts About Water Damage Lakeway
Property damage caused by freezing weather occurs more frequently and creates greater damage than is commonly thought. When water freezes, its volume increases by approximately eleven percent and this expansion exerts tremendous force. This force is sufficient to break concrete or even steel! When even a small amount of water enters a structure and freezes, the resulting expansion further damages and weakens the structure allowing more water to enter. The damage cycle continues until the source problem (the initial entry point) is repaired.
A number of variables acting separately or together contribute to freeze damage. A drop in temperature, the type of building construction, the amount and quality of insulation, the direction and force of wind, and other weather related conditions are all contributing factors.
An occupied building is not completely free from freeze related damages, even when it is constructed to withstand freezing weather and is properly maintained and heated. However, a significant amount of freeze damage occurs when a building is not occupied, especially if the owners are gone for an extended period, and the heating system is not on during the freezing weather. In northern climates, many people go south for the winter. They winterize their homes before they leave by draining the plumbing system and adding antifreeze to plumbing fixtures. Frequently this is not completely effective, and the owners find freeze damage when they return.
Draining the plumbing system needs to be thorough and complete. If the water lines sag or bow, it can result in a low spot that is nearly impossible to completely drain. To be most effective, draining the water lines should be accompanied by the use of compressed air to blow out the lines. If this is not done, water will rest and freeze in the low points of the lines and may cause the pipes to break. The damage then is discovered only after the water is turned back on and escapes from that break. Virtually all plumbing lines are placed inside walls and are not visible. As a result, a freeze caused leak is only discovered when water damage to floors, carpet, walls, or ceilings becomes visible. Occasionally the sound of spraying water can be heard by an occupant, but by then it may already be too late. The leak has already caused some degree of damage.
People living in the south usually consider themselves immune from this type of damage. Because of this sense of security, construction in the southern parts of the country often does not adequately take into consideration that fact that the temperature does occasionally drop below freezing. When that happens and property is poorly insulated, then damage will occur.
Winter wind, snow or ice storms frequently damage electric power lines and equipment resulting in interruptions of electric power. Most heating systems depend on electricity, and when the power goes off, so does the heat. In severe cold weather, this can result in extensive freeze damage before power is restored.
Buildings that are poorly designed and do not withstand weather well can contribute to their own damage. Many old buildings were not insulated at all. To avoid freezing, plumbing lines were commonly run along the inside of interior walls and ceilings rather than enclosed within the walls. In some cases, many lines simply ran inside un-insulated walls. During renovation of some old homes, blown or foam insulation has been added into wall cavities between interior and exterior wall surfaces and between each stud. This process many times served to insulate heat away from pipes that were located inside of walls and adjacent to the exterior wall surfaces or in attics, actually making them more susceptible to freezing.
The type and age of the plumbing system is also a factor. Rust or corrosion weakens pipes, making leaks easier to occur. When freeze expansion occurs, such pipes will often split open. As thawing begins or when the water is turned back on, this situation will result in water damage.
There is also a form of direct damage that can occur from extreme cold even though no moisture is present. Most building materials and personal property are unaffected by cold alone, provided they are dry. Extremely cold temperatures can damage some sensitive computer and other electronic components. In northern climates, temperatures commonly fall below zero and occasionally dip to minus 40 to 50 degrees. The contraction associated with those extremely low temperatures can congeal Liquefied Petroleum Gas (LPG) and fuel oil, causing heating system failure.
Regardless of the circumstances if water damage occurs from freezing or other sources, call your insurance claims office. The professionals in your insurance companys claims center will offer you emergency advice to mitigate the loss to prevent further damage; they will assign an adjustor who will make an appointment to assess the damage and make recommendations for the proper repair of the situation.
How do I hire a Water Damage Lakeway Company?
Professional fire and water damage restoration contractors have expertise in emergency response and disaster recovery situations. When such disasters strike, be it a flood in your basement or crawl space, a leak in your roof or smoke and soot damage in your home, call fire and flood damage experts for complete repair and restoration services. Restoration companies usually have a set up emergency response hotline, supporting their communities in these stressful situations. The technicians who handle fire and flood damage emergencies are often IICRC certified restoration professionals, experienced in fire, smoke, flooding and water disaster scenarios on residential, commercial and industrial scales.
Professional restoration companies will arrive in your place of emergency within the hour, for the most part. They know that time is of the essence and prompt attention to your emergency will lessen the duration and cost of the restoration project. These experts arrive ready to assess the water damage in your home and start drying out the property immediately. The trucks are equipped with gear and supplies necessary for any fire, smoke, soot and water restoration job. Professional water extraction and drying tools that are used for water removal from your property are industrial strength and are designed for any type of repair and restoration efforts. They truly offer dependable, competent and personalized service for a variety of disaster recovery situations.
Many emergency water restoration scenarios involve mold infestation if left untreated for longer than 24-48 hours. Thus, mold remediation is an essential service water damage restoration contractors engage in routinely. Mold removal, structural drying, dehumidification and disinfection are crucial to the proper completion of most restoration projects.
Professional restoration contractors routinely work directly with homeowners' insurance companies to file claims. Usually, when water damage restoration contractors bill insurance companies directly, the paperwork is filled out accurately and the process flows smoothly so the claim is often processed quickly and without further delays.
Water Damage Restoration Contractors
Water damage cleaning involves numerous considerations. One of the most important considerations involved in repairing damage is that of restorative drying. Restorative drying incorporates four general principles: water removal (extraction), evaporation, dehumidification and temperature control. Understanding these water damage principles will help you ensure that your property is restored to its pre-loss condition properly and with the least amount of risk to your health, structure and belongings.
Drying requires that the affected property be brought back into a proper balance. This requires that water damage restoration professionals monitor and adjust air flow, humidity and temperature properly over time. The first principle of effective damage restoration involves water removal (extraction). You would be surprised how much water wet drywall, carpet and carpet pad can hold. These materials can soak up vast amounts of water. It is essential that as much water as possible be removed from these materials to facilitate the rest of the water damage cleaning process.
The second principle is evaporation. Evaporation is the wicking of water out of saturated materials. Rapid air movement is needed to maximize the evaporative process. Carpet water damage can be mitigated by first extracting as much water as possible, removing and discarding wet pad underneath, then using commercial air movers to facilitate rapid evaporation. The third principle of water-related restoration is dehumidification. This can be accomplished using natural or mechanical techniques. Humidity reduction reduces the risk of secondary damage to materials and contents in a property. Air with high relative humidity is more likely to reach a saturation point where water will form on surfaces, which may lead to microbial growth, mold and other bacterial contamination.
The fourth and final principle of flood water damage restoration and drying is temperature control. Warmer air can hold more water vapor and will better facilitate evaporation in a closed environment. It is generally recommended that water damage repair environments be maintained at approximately 80 degrees Fahrenheit, whenever possible, to optimize temperature-controlled evaporation. Applying these principles to your home or business restoration job will help facilitate the proper restoration of your structure and contents to their pre-loss condition. Failing to apply these principles may result in mold growth and contamination. Black mold removal can be very time-consuming, costly and even hazardous to your health if not done properly. Always consult with a professional water damage restoration professional when attempting conduct water removal or mold removal in a home.
For More Information on Water Damage Lakeway