Best Tips for Emergency Restoration Service Bastrop
Water Damage Restoration is a very difficult task, especially if you are doing everything all by yourself. To avoid the problems and mistakes that could turn up to be a disaster, one should hire a Emergency Restoration Service Bastrop Company. If you go in for a company with experienced team of personnel it will be good for you in long run. They have the experience of restoring things from water damage very easily and try to Avoid the Big Losses.
The sooner your call, the lesser your losses will be. Water damage restoration companies especially in Emergency Restoration Service Bastrop and the surrounding areas will also guarantee you that their repair estimates will be accepted by the insurance company which means that you have almost nothing to lose by hiring professionals.
Interesting Facts About Emergency Restoration Service Bastrop
Water damage ceiling repairs are not uncommon, but they may present problems beyond the expectations of most homeowners. If you are faced with the need to repair water damage to a ceiling, be aware that you could be encountering a major project!
In the 1950's 1960's housing contractors discovered that they could save themselves large amounts of money by spraying what is commonly called popcorn texture onto ceilings rather than pay skilled workmen to provide a smooth finish on the ceilings of living areas. For some reason, people came to view this abomination (in my opinion)as acceptable, and even desirable.
During the 1970's, as the dangers presented by asbestos became evident, many varieties of spray on ceiling finishes came under scrutiny and were discovered to contain dangerous levels of asbestos. Although the use of asbestos was discontinued in the manufacture of spray on ceiling textures, there remain many thousands of popcorn textured ceilings in homes throughout the country.
Spray on textured ceilings containing asbestos generally pose no threat to health, provided that they remain solid and intact. However, in a case in which there is ceiling water damage, the risk is considerable.
The primary method to remove asbestos material involves giving it a thorough soaking with water, which is precisely the situation in the case of ceiling water damage. This loosens the bond between the asbestos fibers themselves and the underlying material. If you experience water damage to a textured ceiling and you aren't positive it was manufactured and installed after 1980, you are facing a risk of asbestos exposure, as the loosened fibers can become dislodged and infest the air you breathe.
If you face such a situation, the first thing to do is to collect samples of the materials from the affected area. This should be done as if you were certain that the samples are positive for asbestos! There are any number of testing facilities on the internet and the Yellow Pages which will test the samples, generally for about $30, with a discount for multiple samples.
These testing labs provide very detailed instructions for the collection of samples, which must be followed to the letter if you wish to prevent danger to yourself and your family.
If your samples test positive for asbestos, you can hire a contractor certified to perform asbestos removal (hiring any contractor not so certified to remove asbestos is illegal), or you can do it yourself, assuming all the attendant risks.
Before undertaking such a task, one would do well to thoroughly investigate the enormity of the undertaking. It's not for the faint of heart, but there are detailed instructions to be found on the internet.
For my part, if I were considering buying a property containing textured ceilings, I would insist upon testing and professional certification that none of the materials contain asbestos before proceeding. The risks and cost associated with asbestos containing materials are exorbitant, and besides, many people today find that popcorn ceilings are not the most attractive of options available..
How do I hire a Emergency Restoration Service Bastrop Company?
Repairing water damage is never a pleasant prospect, but drywall damage repair is less onerous than repairs to some other materials. Ceiling water damage repair for drywall is rather more complicated than repairs to walls, and presents some extra issues.
First of all is the possibility that enough water may have accumulated behind the ceiling drywall that it presents a danger of collapse. While most modern houses have 5/8" fire-stop drywall on the ceilings, this can be a blessing or a curse. It is a blessing in that the extra dimension of the material will withstand greater water weight before collapsing catastrophically. On the other hand, if one isn't able to safely drain out that water before collapse, not only will there be a greater weight and volume of water accumulated, but the extra heavy drywall material itself can present an increased risk of injury to people and things beneath.
Once the source of the ceiling water damage is accounted for, if there is a downward bulge in the ceiling drywall, you will know that there is some amount of accumulated water suspended there. After removing all furnishings and other moveables from the affected area, lay down plastic sheeting to catch the inevitable falling of water and soaked drywall. Obtain a supply of buckets and ideally, a wet/dry vacuum and prepare to catch as much of the water as possible. Pierce the drywall at its lowest point and catch the outflow with the vacuum or in buckets. Once you start, the water will flow until it's gone, so don't skimp on the buckets.
Once the immediate danger of collapse is removed, you can proceed with drywall repairs as in repairing wall water damage. However, note that working overhead presents problems not associated with repairing walls.
Drywall is heavy, and the thicker, fire-stop types are the heaviest of all. If you have to replace any area of substantial size, plan to have one or more helpers to hold the patch in place while it's secured with screws or nails.
Also, take account of the fact that you'll be working overhead, and some means of reaching the work area will be required. Doing this sort of work can be accomplished on a ladder. However, be aware that working on a ladder on a patch that you can't reach all of will require trip after trip up and down the ladder. Drywall repairs demand a number of steps, all of which must be done in their own time. A good idea is to buy or rent scaffolding to maximize the amount of area you can work on each trip up and down. It's safer in the long run, and your knees will thank you when it's over.
How to Handle Water Damage in 5 'Easy' Steps
Typically, a laminate floor is water damage resistant. Unfortunately, any amount of water can still destroy the laminate floor. A laminate floor is constructed of many sections that are locked together. The homeowner can do water damage repair without needing to take up the entire floor. Before any repairs can be done you need to dry the area that is wet. It needs to be completely dry. Once dry you can put down new laminated flooring in the sections that were damaged.
Water damage can happen to the laminated floor if a washing machine, refrigerator, or dishwasher leaks. Any standing water damage the floor of course. Once you have located what caused the water leak and fixed it, it is time to dry the flooring completely. To do this you can use a wet/dry vacuum or mopping. Which method is used depends on how much water there is. After you get all the excess water dried up, put a fan on the floor and turn it on to dry the flooring.
Water damage repair starts by taking out the damp sections of the floor. To help prevent ruining the surrounding flooring you can try to use a hammer and chisel to start pulling the damaged parts of the flooring away from the floorboards. If these tools do not work, you may have to use a crowbar or circular saw. Next, use a knife to remove the tongue part of the flooring. Turn on the fan again to dry the floorboards before you put down new laminate flooring. It is important to make sure that the floorboards are dry to help prevent mold growing if the floorboards are left wet.
Most laminated flooring are done in a pattern style so you will have to recreate the pattern on the floor that had water damage before you can put it down. Once you have the pattern complete, use construction glue, and put in the first new piece of the pattern. Before it dries make sure that you clean off any excess glue. Put a heavy object on the flooring until it dries completely. Instead of using glue and dealing with the mess you can use nails. If you choose to use nails, you will need to nail the first flooring section on an existing section so it fits tightly. Continue piecing the pattern together on the flooring until you have the floor repaired. If you cannot find the pattern to match your current laminate flooring you will have to tear all of the flooring up and put down a new one with a different pattern. If you are unable to do this job yourself you can hire a professional to do the water damage repair.
For More Information on Emergency Restoration Service Bastrop